When a malfunction has occurred and the diagnostic system has generated one or more fault codes, these are read out differently depending on the equipment used. Please refer to “Fault code messages”.
There are other possibilities than the VP status/pedal position message in order to control the engine speed. Torque speed control - TSC1 (0C 00 00 03/11/E6) The TSC1 message has priority over the pedal position that is sent with the VP status message.
This article describes Cummins actuator and governor control specifications and the troubleshooting of electric fuel control governor.
Normally Closed-(Symbol N.C.) - As applied to a magnetically operated device such as a valve or the contacts of a relay, Normally Closed indicates that the valve or relay contacts are closed when no power is supplied to the operating magnet.
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat