Home Products News Contact Us
Home > News > Correct Operation Process And Precautions of Diesel Generator Set

Correct Operation Process And Precautions of Diesel Generator Set

Aug. 02, 2023

Diesel generator sets have been used in our daily life. Therefore, it is also necessary to pay attention in daily operation. Because no matter what machine, there will always be unexpected situations. Therefore, we must take precautions, and it is still necessary to understand its security issues in depth. Below, Starlight Power Generation Equipment will introduce the safety precautions when using diesel generator sets.


deutz hatz cummins perkins volvo


Diesel generator sets must be operated by personnel who are familiar with the structure of the unit, master the safe operation rules for running new or newly inspected diesel engines, run for 50 hours as required, and carry out necessary maintenance.


Diesel generator sets are not used for a long time. Before normal operation, they must pass strict inspections, mainly to check the insulation status of the windings, wiring, etc. If there is any difference, get the necessary treatment.


After the diesel engine is started, the speed should be slowly increased. In any case, under good conditions, no-load operation from low speed to rated speed is possible. No-load operation, oil pressure, noise, excitation current, three-phase voltage changes, etc. should be checked immediately. Once the situation is found, start over. If everything is normal and running normally, the operator should closely monitor the change of the instrument on the control screen, whether it is within the allowable range, and make corresponding adjustments.


Operators and operators should maintain a safe distance between driven equipment and work safety equipment, and wear protective equipment. Starlight power generation equipment reminds users to be careful in switching operations, such as the position where the power switch should be closed at each branch, then the main switch, and then the four-pole double-throw switch. when the power supply is in reverse order. For normal shutdown, first remove part of the load, then turn off the main power switch, and finally turn off the main switch of the diesel engine, it is not allowed to pull out, and the main switch is disconnected from the automatic diesel engine. After the unit shutdown (work diary) is routinely checked and recorded.


As a professional diesel generator manufacturer, we always insist on using first-class talents to build a first-class enterprise, create first-class products, create first-class services, and strive to build a first-class domestic enterprise. If you would like to get more information welcome to contact us via sales@dieselgeneratortech.com.

Share
Contact Us
  • Add.: Room 601, Laboratory Building, No.2 Gaohua Road, Nanning, Guangxi, China.
  • Tel.: +86 771 5805 269
  • Fax: +86 771 5805 259
  • Cellphone: +86 134 8102 4441
                    +86 138 7819 8542
  • E-mail: sales@dieselgeneratortech.com
Follow Us

Copyright © Guangxi Dingbo Power Equipment Manufacturing Co., Ltd. All Rights Reserved | Sitemap

Update cookies preferences

seokeywords:

test2
Contact Us