The piston connecting rod is one of the main moving parts in the diesel generator set. Care must be taken when disassembling the piston connecting rod. When changing parts, pay attention to the structural differences of each model, otherwise it will cause adverse consequences.
Preparation before commissioning. The fuel pump and fuel injector have been tested by the test bench. The diesel engine technology is in good condition and has entered the hot running state; the fuel pump and the drive unit are properly connected, the gear pump is injected with clean fuel
In principle, the intake, compression, work and exhaust processes of the genset diesel engine are started or completed when the piston reaches the top dead center and reaches the bottom dead center. However, in order to make the intake more fully, the exhaust is cleaner, and the intake and exhaust valves should be opened early and delayed.
The DC motor is the motive force of the output torque, and most of its structures use a four-pole series-excited motor. Such a motor has a large output torque at a low speed and a strong overload capability.
Copyright © Guangxi Dingbo Power Equipment Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat