The engine can be started after the installation is completed and checked. Each control unit supplied with the engine or as a spare part has a default setting. The default setting is chosen to allow the engines to work in most applications. In certain circumstances
In this article, we will continue to introduce fault codes of Volvo diesel generator engine TAD734GE model.
This accelerator pedal/potentiometer corresponds to the control unit standard value (0.5 V or 4.5 V respectively). The end position resistor is used to detect electrical faults in the accelerator/potentiometer (end position resistors are built into many accelerators/potentiometers and do not need to be added in these cases).
NOTICE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality requirements above. 1) If sulphur content is > 1.0% by weight, use oil with TBN > 15. 2) The oil must also comply with at least one of the following specifications: ACEA:E7, ACEA:E5, Global DHD-1, API:CI-4 eller API:CH-4.
Navigation
Contact Us
Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap
WeChat