Home Products News Contact Us
Home > Supports > Diesel Engine > 6 Solutions to Oil Leakage of Volvo Diesel Generator Set

6 Solutions to Oil Leakage of Volvo Diesel Generator Set

Aug. 22, 2022

Volvo diesel generator sets meet the diversified needs of customers because of their reliable stability, economy, power, durability and environment. However, with the extension of working hours of Volvo diesel generator sets, various failures may occur, among which What troubles users is the oil leakage of the unit, so what should we do about the oil leakage of Volvo diesel generator sets? This is a concern for many users. Starlight Power Equipment tells you six solutions to the oil leakage problem of Volvo diesel generator sets.

volvo generators

1. Adhesion method

Adhesive patching is suitable for small leaks by cleaning the damaged area and then applying adhesive patching to the damaged area.

2. Anaerobic glue method

This method is suitable for the leakage phenomenon of high pressure oil pipe joint threads, vent bolts and stud bolts. The method is to apply the anaerobic adhesive to the thread or screw hole. After the anaerobic adhesive is applied, it can quickly solidify into a film to fill the gap.

3. Liquid sealant method

This method is suitable for interfacial leakage or destructive leakage caused by solid gasket defects. The method is to clean the joint surface of the solid gasket, and then apply liquid sealant. After the liquid sealant is cured, it will form a uniform and stable Peelable film to successfully prevent leakage.

4. The padding method

If oil leaks from the leak-proof gasket of the Volvo diesel generator set, you can add a layer of thin plastic pads with smooth sides on both sides of the gasket and tighten it hard to prevent leakage.

5. Size recovery glue method

This method is suitable for the leakage of bearings and shaft sleeves, bearing seats, self-tightening oil seals, etc. The size recovery glue is applied to the worn parts. After the glue is cured, a film layer with high mechanical strength can be formed, which is relatively wear-resistant. Machining to restore the shape and fit accuracy of the parts.

6. Lacquer method

It is suitable for leakage at the joints of Volvo diesel generator set water tank, crankcase, etc. The method is to soak the paint flakes in alcohol, and then apply the paint flake liquid evenly to the joints.

The oil leakage of the Volvo diesel generator set will not only increase the fuel consumption of the unit, but also deteriorate the sanitary conditions of the unit, which is not conducive to the maintenance of the unit. The above is the introduction to the oil leakage solution of Volvo diesel generator set brought to you by Xiaobian. If users encounter the oil leakage of Volvo diesel generator set, they can refer to the above six methods to remedy the oil leakage situation.

Starlight Power has advanced testing equipment, modern production technology, professional manufacturing technology, perfect quality management system, and strong technical research and development capabilities. It can provide 3KW~2500KW various specifications of ordinary, automatic, four protection, automatic switching, low noise and mobile generator sets, high quality and low energy consumption to meet the diverse power needs of customers, and can also meet users with different voltages and different frequencies. It is required to create a parallel power supply system for multiple units. If you are interested in our product or any question on generator, welcome to send email to sales@dieselgeneratortech.com.

Contact Us
  • Add.: No. 10 Kechuang Road, High tech Zone, Nanning, Guangxi, China
  • Tel.: +86 771 5805 269
  • Fax: +86 771 5805 259
  • Cellphone: +86 134 8102 4441
                    +86 138 7819 8542
  • E-mail: sales@dieselgeneratortech.com
Follow Us

Copyright © Guangxi Dingbo Generator Set Manufacturing Co., Ltd. All Rights Reserved | Sitemap

Update cookies preferences
Contact Us